|
|
||
|
||
|
|
![]()
|
|
When it comes to quality and features,
you've arrived with this setup. Let's start with the basics: This
Pan, Tilt and Zoom setup is designed to offer several choices for
installation. As you can see (right), there are several way
to mount the Dome. Your choices are a wall mount or a recessed
ceiling mount. You may also Hoist the camera (Hoist is not
included). However when ordering, just specify whether you want the
Exterior Wall Mount or Recessed Mount (Ring) included per camera at
no additional charge. Our Color DiGiDomes
Panning & Tilting capabilites offer you a 355 degree (adjustable
rotation) and a 90 degree up or down angle (look straight down if
needed). Your camera(s) can be set to automatically pan back &
forth, stopped and pointed in the direction desired all via our easy
to use DiGiCam interface. And did we mention incredible Zooming
features? The magnification of our Color Digital
DSP 1/3" Sony CCD camera offers an incredible
230x Zoom! That's right. You'll receive an Optical
23X and a Digital 10X zoom which is incredible to say the least.
Yes, you have full control of any DiGiDome whether your at the main
location of your DiGiCam system or on a Remote PC somewhere else in
the world.
How is this accomplished? Well, put simply, by our DG-Net PC interface (seen right). Here's how: On our DiGiDomes are 3 leads. One is for power, another for video and the last for Data (two wires/conductor). Obviously you'll have to plug your camera into an outlet for power, then run your video cable and data wire back to your main setup. Plug the video/coax cable into the back of the DiGiCam PCI card and then take your Data wire and plug these two wires into the RS-485 + and - connector. Plug the included power supply (not seen) into your DG-NET and plug that into any power source. Next plug the included DG-NET serial cable into a serial port on your PC. That's it! Now the DiGiCam can control all of your cameras functions locally or remotely. |
|
||||||||||||||||||
|
|||||||||||||||||||
|
|
||
|
||
|
|
![]()
|
|
When it comes to quality and features,
you've arrived with this setup. Let's start with the basics: This
Pan, Tilt and Zoom setup is designed to offer several choices for
installation. As you can see (right), there are several way
to mount the Dome. Your choices are a wall mount or a recessed
ceiling mount. You may also Hoist the camera (Hoist is not
included). However when ordering, just specify whether you want the
Exterior Wall Mount or Recessed Mount (Ring) included per camera at
no additional charge. Our Color DiGiDomes
Panning & Tilting capabilites offer you a 355 degree (adjustable
rotation) and a 90 degree up or down angle (look straight down if
needed). Your camera(s) can be set to automatically pan back &
forth, stopped and pointed in the direction desired all via our easy
to use DiGiCam interface. And did we mention incredible Zooming
features? The magnification of our Color Digital
DSP 1/3" Sony CCD camera offers an incredible
230x Zoom! That's right. You'll receive an Optical
23X and a Digital 10X zoom which is incredible to say the least.
Yes, you have full control of any DiGiDome whether your at the main
location of your DiGiCam system or on a Remote PC somewhere else in
the world.
How is this accomplished? Well, put simply, by our DG-Net PC interface (seen right). Here's how: On our DiGiDomes are 3 leads. One is for power, another for video and the last for Data (two wires/conductor). Obviously you'll have to plug your camera into an outlet for power, then run your video cable and data wire back to your main setup. Plug the video/coax cable into the back of the DiGiCam PCI card and then take your Data wire and plug these two wires into the RS-485 + and - connector. Plug the included power supply (not seen) into your DG-NET and plug that into any power source. Next plug the included DG-NET serial cable into a serial port on your PC. That's it! Now the DiGiCam can control all of your cameras functions locally or remotely. |
|
||||||||||||||||||
|
|||||||||||||||||||